Zhengzhou Huaqiang Heavy Industry teaches you the maintenance and maintenance methods of compound fertilizer granulator machine.

Machine maintenance: bearing crusher bearing machine is fully loaded, so good lubrication bearing life has a great relationship, it directly affects the service life and availability of the machine, and requires that the lubricating oil must be clean, the seal must be good, and the main machine Oil: rotating bearings; rolling bearings; gears; movable bearings and sliding planes. The newly installed tires are easy to loose and must be checked frequently. Note that the working of the machine parts is normal.

Check the degree of wear of the wearing parts, and pay attention to replace the worn parts at any time. When placing the chassis of the movable unit, dirt and other materials should be removed to prevent the machine from being unable to move the materials to the chassis when the movable bearing fails, which may cause serious accidents. Bearing oil temperature If the rotating gear is in normal operation, if there is an impact, stop the inspection immediately and eliminate it.

Installation and debugging: The equipment should be installed in horizontal concrete on the basis of the ground, and the bolts should be fixed with the ground. When installing, pay attention to the main body and vertical level. After installation, tighten the bolts and the main machine, such as the door, if you are welcome to tighten it. According to the power configuration of the equipment to control switch. After inspection, no-load test, test normal production.

The maintenance of granulator machine for fertilizer is an extremely important and frequent work. It should be operated and maintained in close cooperation with full-time personnel on duty.