Organic fertilizer granulator is an essential equipment for the production of fertilizer. How can it be do during inspection and maintenance? Let's take a look at the following introduction, I hope to help everyone.

1. Bearing: It is the load bearing center of the whole organic fertilizer granulator. Therefore, it is very important for the maintenance of the bearing. Its quality directly determines the service life and operation rate of the machine, so the injected lubricant should be It must be cleaned and the seal must be good.

2. For newly installed tires, inspections must be carried out frequently, as loosening is likely to have a large impact on the machine.

3. Check whether the work of each part of the machine is normal, do a good job of checking the wear level of the wear parts, and pay attention to replace the worn parts at any time.

4, organic fertilizer granulator, bearing If the oil temperature rises, should immediately stop to check the reasons to eliminate.

5, should be done to remove impurities such as dust. Keep it clean so that the movable bearing cannot move on the chassis when the machine encounters unbreakable materials, resulting in a serious accident.