Everyone knows that the core of the organic fertilizer production line is the organic fertilizer granulator machine. As long as the organic fertilizer granulator runs smoothly, it is very helpful for organic fertilizer production and other aspects. Everyone knows that, but all machines have for a service life, how many years the organic fertilizer granulator can be used depend on its own maintenance. What we need to do is how to extend the service life of the organic fertilizer granulator. Let me introduce to you.

1. The operator should pay attention to regularly check the parts that are easily worn out in the structure of the organic fertilizer granulator, and observe whether its wear is not serious or very serious. If it belongs to the latter, it should be replaced immediately to prevent accidents caused by persistent use.

2. For the bottom frame plane of the movable device, pay attention to maintaining sanitation and remove dust and other objects in time to prevent the movable bearing from moving smoothly on the bottom frame when the equipment encounters unbreakable materials, which may cause serious accidents.

3. During the operation of the granulator machine for fertilizer, it is found that, like some installed wheel tyres, it is very easy to loosen, so frequent inspections are required. In addition, if the bearing oil temperature rises too fast, or there is an abnormal impact sound from the rotating gear, the power should be cut off immediately, and the cause should be checked and then solved.

4. Good lubricating oil is very helpful to bearing life. Therefore, the operator must ensure that the injected lubricating oil is clean and has good sealing performance. The above four points are the ways to extend the service life of the organic fertilizer granulator. You need to understand it carefully. As long as you follow the precautions mentioned above, you will be able to effectively extend the service life of the granulator. Pay more attention to the process of using it.


How to do daily maintenance of organic fertilizer equipment?

1. Keep the work site clean. After each organic fertilizer equipment test, the granulation leaves and the residual mortar inside and outside the granulation pot should be thoroughly removed, the mortar and flying objects scattered or splashed on the organic fertilizer equipment should be cleaned, and the organic fertilizer equipment should be removed. The exposed processing surface of the machine is wiped clean, coated with anti-rust meat paint, and covered with a corresponding protective cover to prevent the second intrusion of dust.

2. The organic fertilizer equipment has no external refueling holes, and the gears and worm gears are lubricated with special butter for organic fertilizer equipment. The upper gear and the lower gear should be added with triple butter once every season. When refueling, the cover of the dynamic gear box and the cover of the transmission gear can be opened respectively). The sliding surface between the supporting gear box and the hinged joint of the bracket should be lubricated with oil frequently. The worm gear box and bearings have been filled with transmission grease before leaving the factory, but the gearbox machine should be thoroughly cleaned after each year of use, and all protective lubricants should be replaced.

3. Always pay attention to the operation of the organic fertilizer drum granulator. There should be no serious abnormal noises, and there should be no metal friction. If abnormalities are found, they should be stopped immediately and checked, and can be used after troubleshooting. The corresponding inspection cannot be found. The reason cannot start the machine. If there is metal friction sound, check the gap between the organic fertilizer equipment first.

4. Frequently check the standard gap between organic fertilizer equipment.

5. When the organic fertilizer equipment is overhauled, the working gap should be re-measured each time and adjusted several times, and it can be used only after it meets the standards.

6. If the organic fertilizer equipment cannot be operated by pressing the program controller, check the power supply voltage, whether the power plug socket, connecting plug socket, etc. are normal, and check the internal fault of the controller.