Semi wet material crusher adopts high-speed rotating blade to crush High-size and high-efficiency fibers. The semi wet material grinder is mainly used in the
organic fertilizer production line. It has good effect in crushing chicken manure, humic acid and other raw materials. The upper and lower parts of the two-stage rotor are crushed, and the materials are crushed into fine particles by the upper rotor crusher, and then transported to the lower rotor to continue to crush into fine powder, so as to achieve the best effect of material crushing and hammering.
- Principle of semi wet material crusher:
- 1. The semi wet material crusher adopts the two-stage rotor to grind up and down. The material passes through the upper rotor crusher to form fine particles, and then it is transported to the lower rotor to continue to crush into fine powder to achieve the best effect of material powder and hammer powder. Finally, the material outlet is directly discharged.
- 2. This fertilizer equipment is not designed with a screen bottom. More than 100 kinds of materials can be crushed without blocking. Even the materials just fished from the water can be crushed, and will not be blocked due to wet crushing, which will burn the motor and affect the production.
- 3. The semi wet material crusher adopts the high alloy wear-resistant hammer head, and the hammer piece is made of forging, which is especially strong and wear-resistant, stronger and more wear-resistant than the ordinary hammer head, and increases the service life of the hammer piece.
- 4. The semi wet material crusher adopts the two-way gap adjustment technology. If the hammer is worn, it does not need to be repaired, and the position of the moving hammer can continue to be used. Adjusting the gap between the hammer head and the lining plate can control the material size.
- 5. Semi wet material crusher adopts high-tech technology, which can be easily operated by only one person. It is not only safe and reliable, but also easy to maintain.
