Organic fertilizer production is a complicated project. Generally, the design of organic fertilizer production line is based on two production principles, one is organic fertilizer fermentation principle, the other is organic fertilizer granulation principle. Granular organic fertilizer production line generally contains most of the equipment of powdery organic fertilizer production line. In other words, in order to produce granular organic fertilizer, we must first ferment and then produce it into powder organic fertilizer. In addition, the organic fertilizer production line also has the advanced degree of equipment. The advanced organic fertilizer production line has the advantages of labor saving, energy saving, small land occupation, low fertilizer cost and no environmental pollution.

Technologically advanced organic fertilizer production line equipment flow

1. 1. The first step is to ferment and decompose raw materials such as animal manure, and the entire fermentation process can destroy harmful bacterial populations inside.
2.  
3. 2. Secondly, use organic fertilizer crushing equipment to decompose the raw materials.
4.  
5. 3. Matching raw materials is one of the most important processes in the organic fertilizer production. Its main purpose is to add an appropriate amount of auxiliary materials according to a certain ratio to improve the quality of fertilizers.
6.  
7. 4. After the materials are evenly mixed, they are sent to the fertilizer granulator for granulation, which is also a crucial aspect of the entire fertilizer production line.
8.  
9. 5. The raw material obtains high-temperature energy after the drying step. The next step requires low-temperature cooling. Since water cannot be used for cooling, it needs to pass through the cooler equipment to separate the contact between the material and the water.
10.  
11. 6. Sieving is to sieve out the fertilizer of unqualified granules. The screening equipment here has the advantages of simple and easy operation.
12.  
13. 7. Coating the qualified products to increase the brightness and roundness of the particles.
14.  
15. 8. Finished product packaging: Put the coated particles, that is, the finished product, in a ventilated place.